Respiratory Protection Earloop FFP2 Dust Mask
FFP2 Dust Mask Introduction
- Single-use mask that helps protect both the patient and healthcare worker from transfer of microorganisms, body fluids, and particulate material. Individually wrapped.
- Dust mask: dusts from sanding, grinding, sawing and insulating particles elastics.
- The mask has hypoallergenic elastics with a cotton percentage and standard elongation for a comfortable use and very close facial fit.
FFP2 Dust Mask Parameters
Product Type: | Respiratory Protection Earloop FFP2 Dust Mask |
Material: | Polypropylene, Melt blown |
Color: | White |
Feature: | Eco-Friendly, Safety, comfortable |
Application: | Personal protective |
Package: | 20PCS/BOX |
MOQ | 100PCS |
Lead Time | 3-5 days |
Directions for use
- The mask is only for single use .
- The mask should't be removed from its packaging until its required for use.
- Use the respirator in accordance with applicable health and safety regulations.
- Transport and stockage of unused masks should be such that the product is not stored in direct sunlight and in frost free conditions,not in contact with solvents and cannot be damaged by physical contact with hard surfaces/items.
- Fit the respirator and check leak-tightness before entering the contaminated area.
- Wear the respirator for the whole duration of exposure to contaminants.It should not be used for more than 8 hours continuously and should be discarded after use.
- As required by European Health and Safety requirements,the user is advised that when the mask is in contact with the wearer’s skin,it may cause allergic reaction to susceptible individuals.If this is the case,leave the hazard area,remove the mask and seek doctor’s advice.
- If maintained as per storage instructions , product can be used up to 5 years from date of manufacture.
-
Warning
- The user should be trained in the fitting and should be aware of the instructions for using prior to donning the respirator.
- Use in adequately ventilated areas,which are not deficiency of oxygen.
- Do not use this respirator when oxygen concentration is less than 19.5%.
- Do not use the mask in explosive environment.
- The mask must be fitted correctly to ensure the level of protection expected is achieved.
- The facila hairs or heards and certain facial charactrtistics may reduce the effectiveness of the mask.
- For mask mark marked “NR”,the particle filtering half mask shall not be used for more than one shift.
